Retrofit with our 1.25in, motor adapting it to the Hunter Douglas Designer roller shade
26 Feb 2024
0 Comments
Cutomer's demand: I have Hunter Douglas Designer roller shade. I took down and totally different than expected. Biggest issue is the center. The HD blind bead/sproket attaches to the endcap/plate with a screw and not a tab.
Any ideas before I send back
Here is the picture shows the shade system(It shows a mod to an existing clutch)with the ID and OD of the shade tube. We have the right shade motor working with it, please search
https://rollerhouses.com/products/rechargeable-wireless-tubular-roller-shade-motor-kit-with-remote-control-for-motorized-electric-roller-blind-shades-compatible-1-5-shade-tube?variant=45344911851819
There is optional for RF/Wifi gateway, it will integrate with your smarthome.
Multichannel remote and solar charger is on sale.
Some other questions may helpful:
1. Do i use your multi channel remote or reset each erb22 with the single channel and then program the broadlink？
As broadlink is learn the remote commands then with APP and voice control,
eg, if multi channel remote, control each window with each channel, when you still with the demand to control remote, single channel remote normally control one shade,
In broadlink, each shades corresponds to a device, and in the app each device learns, the corresponding remote control, or the corresponding channel of a multi-channel remote control(The broadlink will "Not" let me group. I have to do it in Alexa)
eg, if multi channel remote, control each window with each channel, when you still with the demand to control remote, single channel remote normally control one shade,
In broadlink, each shades corresponds to a device, and in the app each device learns, the corresponding remote control, or the corresponding channel of a multi-channel remote control(The broadlink will "Not" let me group. I have to do it in Alexa)
2. Do I need to be concerned about the difference other than the set up feedback ( motor jog vs beeps)?
We have changed the setup feature from motor jog to beeping. Nothing else difference.
3. Can you tell me the exact rf frequency of the 15 channel remote. I got it to work with the broadlink but I can't get back to the RF Freq. The broadlink dosn't always hit it exactly and won't work if if dosen't
Our remote with fixed rf 433.92
4. How many cycles ( up and down = 1 cycle) or time do you expect before I need a recharge. it would be nice if there was a way to view/report battery level.
Generally only 50% of the electricity from the factory, and then in the process of product placement will also be discharged, so it is best to be fully charged before use and then installed